Car Ghost Immobiliser
Ghost Immobiliser is a sophisticated system that blocks your vehicle from starting without an exclusive pin code sequence that is entered via buttons already in use (such as the ones on the steering wheel or dashboard). The device is inaccessible to thieves and is quiet to operate.
It can be helpful in preventing hotwiring, and newer methods like relay thefts. It can also lower the cost of insurance.
No Radio Frequencies
A ghost immobiliser differs from a standard one in that it doesn't transmit radio frequency, which makes it impossible for thieves to get around the device using a cheap tool for cloning. Ghost immobilisers prevent your car from starting when the burglar has copied or stolen your key.
A ghost immobiliser could also be used to prevent relay attacks. The signal from your keyfob is amplified in order to fool the system to allow your car to start. The Ghost will recognize this and refuse to start the car until you enter the PIN code. This is a great method to combat tech-savvy thieves who have access to inexpensive and simple equipment to steal or clone your vehicle.
The Ghost can be set up discreetly and will not cause damage to your car. It will only work once the correct pin sequence is entered. It will only be recognized by the owner who installed it, which means that no one can access your vehicle until they know the pin sequence. Certain systems let owners set up a service or valet mode to temporarily allow someone else to drive the vehicle without having to disclose their pin number, thereby safeguarding them from thieves who are looking for opportunities.
Additionally, it is user-friendly and simple to disarm and disarm, the Ghost can be linked up with a car tracker to make it possible to locate your vehicle. Learn Additional will offer discounts on your vehicle insurance if it's got a Ghost installed which is a great benefit for the security of your car and its contents.
Although the Ghost immobiliser is not Thatcham certified however, it is an aftermarket item that has been tested by an independent party and found to be effective. Ask the seller of a used vehicle with the Ghost installed if they will transfer it to your vehicle. This will make sure that the new vehicle is more secure than the one that was owned by the previous owner and not transferred it.
No Circuit Cuts
Even if your vehicle is stolen, thieves won't be able start it. They'll have to know the sequence of buttons used to unlock your car and they will not be able to do so if they aren't possessing this knowledge. This will discourage them and prevent them from attempting to steal your vehicle.
If you have an GPS tracking device installed and you are using the Ghost can act as an anti theft device. It can send a signal that can trigger a siren to alert the tracker about a theft attempt. This feature can be activated at any time via your online dashboard.
When you link your Ghost to your CAN data network it will identify the vehicle and its owner through the unique pin code programmed at the time of installation. This allows the device to communicate with your car's ECU and disable the engine. This means that only the car's owner or a person who has the PIN code, is able to start the engine.
The pin code is difficult to decipher for potential thieves because it is created using buttons that are easily accessible by the driver, for example stereo mute and cruise control. Your engineer will also provide you with an emergency Pin Code override card which is similar to a scratch-off lottery ticket and simply needs to be scratched off to reveal the code and the instructions.
Unlike traditional immobilisers which can often be identified by thieves using diagnostics to read the relay of the immobiliser the Ghost is not detected by these methods as it doesn't use any circuit cuts or radio frequencies. Therefore, it is not affected by the new techniques employed by organized gangs that are experts in RF scanning technology and code-grabbing. It is also a life-time product that can easily be removed from your car after you sell it, meaning you will not lose any of the protection you've invested in.
No Key Fobs
In the UK the UK, vehicle theft is on the rise. It is imperative to take proactive measures to safeguard your precious automobiles from opportunistic criminals. The innovative Ghost Immobiliser Autowatch's Ghost Immobiliser Autowatch provides a strong defense against key cloning, hacking and signal relay attacks. It is a subtle and highly effective security system for cars that is easy to install in a wide range of automobiles.
The Ghost immobiliser is not an ordinary system that relies on key fobs. It also does not use a signal relay. It is not affected by signal interception and cannot be activated using stolen or compromised remotes. It's also tamperproof and has no external wiring, which makes it difficult to take off or disable.
It safeguards you from key-long hacking keys, key theft and key-long by preventing your engine from starting until a unique PIN has been entered. This is achieved by utilising buttons already in the vehicle like those found on the steering wheel or door panels, as well as the central consoles to create a customized disarm sequence that can be up to 20 presses (like entering a PIN in your smartphone).
This is the only way to start your engine, and it only works if you have entered the correct pin code. This makes it hard for thieves to steal your vehicle and is simple to use. If you're worried about forgetting the pin code, the installer can provide you with an emergency driver fob, which lets you drive your car as normal.
The Ghost immobiliser isn't detected by diagnostic equipment, such as RF scanners or other tools used by thieves. This method of installation is more stealthy, which increases its effectiveness and enables the system to be fitted in a position where it would be difficult for thieves to access.
Ghost immobilisers are an inexpensive and highly effective deterrent against theft and improve the resale value of your car. They are also recognised by some insurance companies and may result in reduced costs.
No Damage
You can rest assured that your car will be secure from hacking and cloning as well as key-fob theft, as well as other common theft methods, if fitted with an immobiliser. This is especially crucial if you've invested lots of money and time customising your car or own an expensive or rare model. A ghost immobiliser works quietly, leaving no evidence of instillation, and requiring no new parts to be put in.
The system works by using buttons on your steering wheel, center console or door panels and enables you to create an encrypted pin code sequence that must be entered before the engine can begin. The sequence can be modified by you at any time, which means that even if a thief has your pin number and is able to start your car. It is also simple to turn off the device in a service valet mode to allow your car to be taken away to be cleaned, serviced or for an MOT without being activated.
This means that even if your vehicle is cloned or stolen, the thief will not be in a position to start your car and be caught in the act. The system also alerts you to any tampering with your vehicle's wiring system for example, cutting or signal interference, and can send this information to your phone, making it easy for you to ensure that the security of your car is always in good order.
You might want to disable or remove the Ghost Immobiliser due to reasons, like for maintenance or for resales. In this case you'll need to follow a specific procedure to remove the device without damaging the wiring system in your vehicle. Wearing safety gloves and flashlights is a good idea during this procedure. You can also consult any documentation you have like user manuals or installation instructions, to determine the exact location of the device.
Once the immobiliser is disconnected from your vehicle's wiring system, you are able to reconnect the battery to your car and then test to ensure that it functions correctly and that all electrical components are functioning according to their intended purpose. It is then time to insulate and rejoin any wires that were cut using electrical tape or soldering when necessary. Check to see if any exposed wires are present, and that any dangling wires are secured by zip ties or other appropriate means. Also, schedule a car inspection with a professional make sure that the removal process didn't cause damage to other systems within your car.