How to Install a Ghost Immobiliser
Ghost immobilisers are hidden security system that shields your car from hacking and key cloning. It stops the engine from starting until a PIN code has been entered. This can be as long as 20 characters.
It is undetectable by thieves and they are unlikely to be expecting this extra layer of security. Certain systems come with an app which allows the owner to disarm their immobiliser in the event of forgetting their PIN code or to use the service/valet mode.
Connecting the vehicle's CAN Bus to the vehicle's
The Ghost 2 Immobiliser is a cutting-edge security system that can be incorporated into your vehicle's ECU and provides a discrete protection against thieves. It is highly effective and user-friendly, making it a valuable component of your vehicle's security arsenal. However, just like any other anti-theft device, it's not foolproof and requires regular maintenance to ensure its operation. Fortunately, this guide can help you get the most value from the Ghost 2 Immobiliser.
CAN (Controller Area Network) is a robust serial network that lets microcontrollers communicate with one another across short distances without the necessity of a central control unit. It is designed to allow multiplexing of electrical wiring in vehicles to cut down on copper and comes with a variety of advantages, such as low cost and a simple use.
The CAN protocol is utilized in a majority of modern vehicles to communicate with the engine management system, steering control module air conditioning controls and many more. It also carries sensor information, such as speed sensors and other inputs, to control the vehicle's various features. The CAN bus is able to monitor the status of these different components. It could stop the vehicle from starting when it is in danger of failure.
It is important to understand how the CAN bus works and how it is secured. It's possible to add new features to a vehicle by using CAN bus, however it is important to protect it against hackers and other threats. what is ghost immobiliser to accomplish this is to install firewalls and monitoring your CAN bus using software.
Ghost2's control unit is hidden inside the car's wiring harness or dashboard, eliminating the possibility of a criminal physically tampering with it. It is impossible to reset a pin code or an emergency code without having access to the car.
If you have to give your car away to a valet parking service, maintenance, or any other reason, you can turn on the Transport Mode. This feature turns off both the keyfob as well as the ignition functions of the Ghost immobiliser. It will only be activated when the vehicle has reached 31 mph over a period of 15 minutes.
How do I create a PIN code
The Ghost immobiliser is a powerful security system that protects your vehicle from theft. The revolutionary technology utilizes a PIN to disable the vehicle's engine and prevent it from starting if you don't have the correct code, or a valid fob or mobile. The system's discrete design is unnoticeable and offers unrivaled security against theft. Furthermore, the system is TASSA certified and can lead to significant savings on insurance premiums for cars.
During installation, the Ghost system enters an learning mode that records the sequence of buttons pressed to create your unique pin code. After the pin code is created the installer will guide you through the steps to activate the system. Once activated by the system, the Ghost system will disable the motor that starts your vehicle unless a valid PIN is entered or the vehicle is switched to transport mode. This makes it extremely difficult for thieves or cloners to hack into or clone your vehicle's starter system.
Installing an Ghost immobiliser is straightforward however it is essential to follow the precise instructions in the user's guide to ensure proper operation. Basic hand tools can assist in making accurate connections and a multimeter will help you verify the electrical value. Insulation tape and heat shrink tubing may shield the wire from damage and cable tie is essential to keep everything tidy and secure. Also, make sure to test the system frequently to spot any problems and potential errors.
It is important to test the system one last time before you turn on the ignition. Ghost immobilisers will re-arm themselves after 3 to 30 second, depending on the model of your car. It also has the option of a Service/Valet mode, which allows you to temporarily disable the system while servicing your vehicle or valet parking.
Ideally, the immobiliser should be hidden beneath the dashboard or behind the steering wheel. Use a small amount of tape or paint on the wires CAN H and L to make them easier to find during testing. Additionally the CAN H and L wires should be connected to a power source that provides continuous 12V. It is essential to test the connections after testing as incorrect identification of these wires could cause system malfunction.
Activating the system
A ghost immobiliser prevents the car from starting unless you press a number of buttons inside the vehicle, typically on the steering wheel or door panel, or the central console. The sequence is determined by the user and is able to be changed at any time. Once the system is activated it is not able to be disabled by thieves and is a great option for anyone who wishes to secure their vehicle from theft.
The device is not designed to be able to be detected by modern diagnostic tools and code-grabbing technology. It also does not send radio signals, which makes it even harder for thieves to detect the device.
If the device is identified, it will stop the engine from starting and sound an alarm with a loud sound to deter thieves. The device can be used to monitor the location of a vehicle and assist in the recovery of the vehicle in case it was stolen.
Contact Car Specalist Customs for a estimate or to discuss your options if you're interested in a Ghost immobiliser. We are fully trained to install a ghost immobiliser on your vehicle and will make sure it is concealed in a difficult-to-access area. We can also provide other security measures such as the wheel lock and kill switch to keep your car safe from thieves.
Disarming the System
It is essential to know how to disarm the Ghost immobiliser, if it's installed on your car. This is useful in the event that you lose your keys or your car battery is dead. The system uses an individual PIN code that only you know, so the immobiliser will not start your vehicle without entering this code. The easiest way to enter the code is to press a combination of buttons on your dashboard or the steering wheel. This is a simpler method than using the key fob and also stops anyone from copying your remote.
Ghost2 isn't intrusive unlike other immobilisers from the aftermarket that require cutting wires for installation. It also works with the CAN bus system of your vehicle to function. Its most notable feature is its ability bypass the engine without affecting the normal functions, making it difficult for thieves to use signal boosters or copy your car keys. Additionally, it doesn't emit radio frequencies, meaning thieves aren't able to detect the system.
The Ghost system has the option of a Transport Mode that allows you to temporarily disable security in situations such as service or transportation. This is a great option if you have to lend your vehicle to a person who isn't sharing the PIN code, or in case you wish to secure your vehicle while driving it. To activate Transport Mode you need to press the service button five times in a matter of 2 seconds. The Ghost system will confirm activation using 5 signal indicators.
Save the emergency code in your vehicle in a safe place. If you happen to discover yourself locked out of your vehicle, you'll be able to contact the technician or company who installed the system and they will provide you with the code. If you cannot reach them, you can always attempt to contact an authorized dealer, but this will involve verification procedures and could incur additional charges.
This system is not only useful, but it will also safeguard your vehicle from theft, and also reduce cost of insurance. Many insurance companies offer lower rates or financial incentives to install this anti-theft system.